Equisol Strip

Wear protective gloves and goggles. Shake the bottle well.

Apply to a dry surface with a brush or soft broom or spray in the direction of the grain. Apply and strip in areas 12m2 or smaller for maximum effectiveness. Ensure the Equisol Strip is pushed into the grain by scrubbing. Leave for 30 mins, keeping timber wet with a light water mist to keep the Strip moist. Be careful not to use too much water, which will wash the Strip off the timber. After 30 minutes, reapply Equisol Strip over the first coat and scrub in to reactivate the stripping formula. Leave on for another 30 minutes, keeping moist with water mist.

Removal: Test if the finish is loose and lift off the surface with a scraper. The timber will turn black when the stripper is ready to be removed. Apply more stripper where the timber is still light. The type and thickness of the finish will affect the time until layers are loose.

Use a high-pressure washer set to 50 bar (without turbo mode), working in the direction of the grain. A garden hose is not enough. Heavy finishes with multiple layers may require a repeat application of Equisol Strip. Soft timbers will feel furry due to the high-pressure cleaning. Once the Equisol Strip and finish have been removed, use a garden hose to rinse off any leftover chemicals on the surface. Your timber should look bare but darker. Use Equisol Prime and Equisol Vitalise to brighten timber before oiling. Sand any rough or furry patches with 80-grit sandpaper to restore a smooth finish.

Safety Directions

Harmful if swallowed and in contact with the skin.

Causes allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life.

Avoid breathing mist, vapours or spray. Wear protective clothing, gloves, eye/face protection and suitable respirator as required. Wash hands, face and all exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated clothing should not be allowed out of the workplace, and should be washed before re-use. Store in a closed container, in a well-ventilated place and away from oxidising agents and foodstuffs. Do not empty into drains.

First Aid: If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 13 11 26; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand.

Swallowed: If swallowed, rinse mouth. Do NOT induce vomiting. Give a glass of water. Immediately call a POISON CENTRE or doctor.

Eye: Hold eyes open, flush with running water for at least 15 minutes and see a doctor.

Skin: If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.

Inhaled: Remove from contaminated area – avoid becoming a casualty. Allow the patient most comfortable position and keep warm. Apply artificial respiration if not breathing. Seek medical advice.

Fire Hazard: If involved in a fire use water fog, foam or dry agents. Avoid breathing products of combustion.

Spillage: Clear the area of all unprotected personnel. Slippery when spilt. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labelled drums. Dispose of contents/containers in accordance with local regulations.

Disposal: Do NOT pour leftover product down the drain. Keep unwanted products in sealed containers for disposal via chemical waste collections.